1. When processing CNC precision hardware parts. Operators are required to maintain the correct posture and have sufficient energy to cope with the work. During operation, they must concentrate their thoughts. It is strictly forbidden to chat and cooperate with each other. Operators must not operate in a state of irritability and fatigue. For personal safety, avoid accidents. Ensure safe operation. Before entering the work position, all employees check whether their clothing meets the job requirements. Slippers, high heels and clothing that affect safety are not allowed. Those with long hair must wear a safety helmet.
2. Check whether the moving part is filled with lubricating oil before mechanical action, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. Operation is strictly prohibited when the machine is faulty.
3. When starting the power to start the machine, you must wait for all other personnel to leave the working area of the machine and remove the sundries on the workbench before it can be started.
4. When the machine is working, it is forbidden to reach into the working area of the slider, and it is strictly forbidden to pick up and place the workpiece by hand. Standard tools must be used when picking and placing the workpiece in the die. If you find any abnormal sound or malfunction of the machine, you should immediately turn off the power switch for inspection. After the machine is started, one person transports materials and operates the machine. Others are not allowed to press the electric building or pedal the foot switch board. For the safety of others, they cannot put their hands in the working area of the machine or touch the moving parts of the machine with their hands.
5. When changing the mold, first turn off the power supply, and then start to install and debug the mold after the press movement department stops running. After installation and adjustment, move the flywheel by hand to test punch twice. In order to avoid unnecessary collision between the machine and the product to be processed, the upper and lower molds must be checked for symmetry and reasonableness, whether the screws are firm, and whether the blank holder is reasonable Location.